n. 1-2/2025 57 FOCUS cato per terreni compatti e vegetazione resistente, grazie alla sua notevole robustezza; Extend, per l’abbattimento sotto chioma o lungo i filari, grazie alla funzione di traslazione laterale fino a 500 mm; Reverse, caratterizzato da un telaio verticale che può essere accoppiato sia anteriormente che posteriormente al trattore; XL che, come suggerisce il nome, ha una notevole larghezza di lavoro (fino a 6 m) ed è quindi adatto per lavorare vaste estensioni. La CRG di Mori (TN) offre un rullo pacciamatura (un’altra definizione del “roller crimper”), dotato di palette in acciaio temperato da 60 mm di altezza, disposte a ranghi sfalsati sullo sviluppo esterno del cilindro principale. Anche in questo caso, il rullo folle può essere appesantito con acqua o sabbia al suo interno, ad esempio per un massimo di 180 kg sul modello da 1,4 m di larghezza, all’interno di una gamma che si estende fino a 2 m. È disponibile anche la versione con traslazione laterale. Il roller crimper Katana commercializzato in Italia dalla Agritom di Calvisano (BS) si avvale invece di lame elicoidali fissate su un rotore centrale, completato da una barra anteriore che provvede all’abbattimento della vegetazione prima della sfibratura da parte delle lame. Disponibile fino a 3 m di larghezza di lavoro, ha una massa massima di 1.800 kg circa, ottenuta con l’ausilio di due batterie di zavorre in acciaio, installate nella parte superiore del telaio della macchina. Richiede trattori fino a 120 Cv e può essere montato sia anteriormente che posteriormente alla motrice. Valeria Tadini the Evo, suitable for compact soil and resistant vegetation, thanks to its remarkable sturdiness; Extend, for cutting under foliage or along rows, thanks to the lateral translation function up to 500 mm; Reverse, characterized by a vertical frame that can be coupled to the front or rear of the tractor; XL which, as the name suggests, has a considerable working width (up to 6 m) and is therefore suitable for working large areas. CRG from Mori (Trento) offers a mulching roller (another name for a roller-crimper) equipped with 60 mm high-tempered steel blades arranged in staggered rows on the outer part of the main cylinder. Also in this case, the idle roller can be weighted down with water or sand inside it, for example, up to a maximum of 180 kg on the 1.4 m wide model, within a range that extends up to 2 m. A version with lateral movement is also available. The roller crimper Katana, marketed in Italy by Agritom of Calvisano (BS), uses helical blades fixed on a central rotor, completed by a front bar that cuts down the vegetation before the blades shred it. Available with a working width of up to 3 meters, it has a maximum mass of approximately 1,800 kg, obtained with the aid of two steel ballast weights installed in the upper part of the machine frame. It requires tractors of up to 120 Hp and can be mounted either at the front or rear of the tractor. Valeria Tadini Rullo FR 120 – 300 di Vigolo Roller crimper FR 120 - 300 by Vigolo
RkJQdWJsaXNoZXIy NTY4ODI=